A walk-in shower makes a bathroom feel larger, easier to clean, and far simpler to step into every day. Sky Pro Remodeling designs and builds walk-in showers for Bellevue and Eastside homes, from compact alcove layouts to open, curbless wet rooms. Every build is centered on proper waterproofing so the result holds up through years of Pacific Northwest moisture.
Walk-in showers have become the centerpiece of most bathroom remodels on the Eastside, and for good reason. They open up floor space, remove the awkward step-over of a tub, and leave room for a bench, a handheld sprayer, or a built-in niche. Whether you are updating a dated guest bath or building a spacious primary suite, the walk-in layout adapts to the room you already have.
What separates a shower that lasts from one that fails is what happens behind the tile. Water finds every gap, and in our climate a shower that is not waterproofed correctly will eventually rot the subfloor and framing beneath it. We build every shower on a complete waterproofing system and confirm the pan holds water before a single tile goes up.
Sky Pro Remodeling handles the full scope in-house, from moving the drain and valve to setting tile and hanging glass. That means one crew is accountable for the plumbing, the substrate, the finish, and the final result. Call us at (206) 825-2773 to talk through your bathroom.
Every project is scoped to your bathroom, but a typical walk-in shower build includes the following.
We remove the old tub or shower, tile, and any water-damaged material down to the studs and subfloor. Rotted sheathing or damaged framing is documented and repaired before new work begins.
We set or relocate the drain, supply lines, and mixing valve to fit the new layout. All plumbing changes are completed to current code before the walls are closed.
We build a pan that slopes evenly to the drain, whether that is a custom mortar bed or a pre-formed base. Correct slope is what keeps water moving off the floor instead of pooling.
Walls and floor receive a continuous waterproof membrane tied into the drain assembly. We flood-test the pan to confirm it holds before any tile is installed.
We set your chosen wall and floor surface, along with any niche, bench, or curb detailing. Layout is planned so grout lines and large-format seams land cleanly.
We install the enclosure, shower head, valve trim, handheld, and any grab bars or accessories. A final check confirms drainage, water pressure, and a leak-free seal.
This full bathroom was rebuilt around a walk-in shower finished floor to ceiling in large-format concrete-look porcelain tile. The shower is enclosed with frameless clear glass and fitted with a square rain head, a wall-mount pressure-balance valve and a handheld sprayer on a hose, all in a brushed metal finish. Two stacked recessed niches were framed into the wet wall and lined with copper-tone hexagon mosaic, each edged in metal trim, and the same mosaic carries across the sloped shower pan to a square center drain. A vertical strip of dark embossed relief tile runs from ceiling to floor behind the shower fittings and repeats on the toilet wall to tie the two zones together. Opposite the shower sits a dark shaker-style double vanity with a light veined stone countertop, undermount sinks, brushed nickel widespread faucets and bar pulls, under a wide metal-framed mirror, with recessed can lighting overhead and light stone-look plank tile on the floor.
Style: Contemporary
This full bathroom remodel pairs a navy blue shaker double vanity with a light veined marble-look stone countertop and undermount porcelain sinks. The wet area was rebuilt as an alcove tub and shower wrapped in white large-format wall tile set with contrasting dark grout, closed off with a clear sliding glass enclosure riding on a matte black barn-style track. A long horizontal recessed niche was framed into the shower wall with a slim black metal edge and integrated LED lighting, tiled tight inside so the joints line up with the surrounding field tile. The floor is a blue and gray patterned cement-look tile carried wall to wall, and the room is finished with matte black shower valves, showerhead and handheld, brushed nickel faucets and cabinet pulls, a large frameless mirror, recessed can lighting and gray woodgrain doors hung in black-painted jambs.
Style: Transitional
The right configuration depends on your floor plan, your budget, and how accessible you need the entry to be.
The most common layout, set between three walls with a low tile curb at the entry. It contains water reliably and fits neatly into the footprint of a former tub, which makes it a straightforward, cost-efficient walk-in. Best when you want a dependable design without structural changes to the floor.
The floor runs flat from the bathroom into the shower with no step, usually drained by a linear channel. It looks seamless and supports aging in place, but it requires recessing the subfloor and careful slope planning. Ideal for accessible or high-end primary baths.
A single fixed glass panel shields the room while the entry stays open, so there is no door to clean or maintain. The look is airy and modern, and it works best when the shower is long enough to keep spray contained. A good fit for larger bathrooms.
Thick tempered glass with minimal hardware creates a clean, open look that shows off the tile. It carries a higher material cost and needs solid blocking in the walls to anchor the hinges and panels. Suited to homeowners who want a polished, showpiece feel.
The shower and the surrounding floor share one waterproofed, tiled zone with no hard separation. It suits compact bathrooms and contemporary designs, and it demands whole-room waterproofing rather than an enclosed pan. Best where every inch of a small footprint counts.
A neat entry set across a corner with two glass walls, using space that would otherwise go unused. It keeps plumbing on adjacent walls and frees up the rest of the room. A practical choice for tight guest baths and smaller footprints.
Tell us about your bathroom and we will help you weigh layouts, materials, and budget. Call (206) 825-2773 to get started.
A walk-in shower moves through the same disciplined sequence on every project.
We review your goals, measure the space, and confirm layout, drain position, and surface selections before ordering any material.
The old fixtures and tile come out, and we inspect the exposed framing and subfloor for hidden water damage.
We repair any rot, reinforce framing for benches and grab bars, and add blocking wherever glass will anchor.
The drain, valve, and supply lines are set or moved to fit the new layout and inspected as required.
We install backer board and build the shower pan to a precise slope toward the drain.
A continuous membrane is applied, then the pan is flood-tested to confirm it holds water before tile goes on.
Wall and floor surfaces, niches, and benches are set, then grouted and sealed.
We hang the enclosure, install trim and accessories, and review the finished shower with you.
Your surface choice sets the look, the upkeep, and a large share of the material cost.
| Option | Best For | Considerations | Relative Cost |
|---|---|---|---|
| Ceramic tile | Budget-conscious walls and guest baths | Softer than porcelain, wide style range, more grout to maintain | $ |
| Porcelain tile | Most walk-in showers | Dense and water-resistant, durable underfoot, the versatile default | $$ |
| Large-format porcelain | Modern, low-grout looks | Fewer seams and easy cleaning, but needs a flat substrate and skilled setting | $$$ |
| Natural stone (marble, travertine) | High-end, spa-style showers | Requires periodic sealing, can etch or stain if neglected | $$$ |
| Solid surface panels | Fast, seamless, low-maintenance walls | Grout-free and easy to clean, with fewer custom design options | $$ |
| Acrylic prefab base and walls | Quick, cost-effective refreshes | Limited sizing and finishes, the most economical durable option | $ |
final material choice depends on site conditions and a written estimate
Watch how our team approaches bathroom remodels, from careful demolition to the final finished shower.
On-site footage from a completed bathroom remodel showing tile, fixtures and finished detail.
On-site footage from a completed bathroom remodel showing tile, fixtures and finished detail.
No two showers cost the same, and these are the factors that move the number most.
A larger shower means more tile, more waterproofing, and more labor. Expanding beyond the original footprint adds framing and plumbing work.
A zero-threshold shower requires recessing the floor and often a linear drain, which adds structural and drainage work a standard curb does not.
Natural stone and large-format tile cost more to buy and take longer to set than standard porcelain, and intricate patterns add labor hours.
Moving the drain or valve, or replacing old galvanized supply lines common in older Eastside homes, increases both material and time.
The membrane system, curb detailing, and any subfloor repair discovered during demolition all factor into the base build.
A frameless enclosure, thermostatic valve, or multiple shower heads raises cost well above a basic framed door and single head.
accurate pricing requires an on-site inspection and written estimate
Bathrooms are unforgiving of shortcuts, so the details behind the wall matter as much as the finish.
We treat the membrane and flood test as non-negotiable steps, not optional ones, because a hidden leak is the most expensive mistake in any bathroom.
The same team handles demolition, plumbing, tile, and glass, so nothing falls through the gaps between separate trades.
We plan ventilation and moisture control around the Pacific Northwest, where poor airflow turns a beautiful shower into a mold problem.
Many Eastside houses have out-of-level floors, undersized framing, and dated plumbing, and we account for those realities before they become surprises.
You get a written scope and straight answers, and we walk you through decisions instead of rushing them.
We protect the rest of your home, keep the site orderly, and treat your schedule with respect from demolition to the final walkthrough.
Schedule an on-site visit and get a clear, written estimate with no pressure. Reach Sky Pro Remodeling at (206) 825-2773.
Most walk-in showers take a couple of weeks from demolition to final glass, though the exact timeline depends on scope. Waterproofing and tile both need proper cure time that cannot be rushed, and custom tile or a curbless build adds days. We give you a realistic schedule with your written estimate so there are no surprises.
If the project moves plumbing, such as relocating a drain or valve, a plumbing permit is typically required in King County. Swapping fixtures within the same footprint may not, but any change to the plumbing or framing usually does. We handle the permitting process so the work is inspected and done to code.
It can be, but it takes more planning. A zero-threshold entry requires recessing the subfloor so the shower floor sits lower than the surrounding bathroom floor, which is more involved in a home with existing joists and limited space beneath. We assess the framing first to confirm it is feasible before recommending it.
Yes, a tub-to-shower conversion is one of the most common bathroom upgrades we do. The tub comes out, the plumbing is reconfigured for a shower drain and valve, and we build the new pan and walls in the existing space. It is a practical way to reclaim room and improve daily access.
Every shower is built on a continuous waterproof membrane across the walls and floor, tied directly into the drain. Before any tile is set, we flood-test the pan to confirm it holds water. That test is the single most important step in preventing hidden leaks and the rot that follows them.
Small tiles or textured porcelain are usually best underfoot because the added grout lines and texture improve traction on a wet surface. Large, smooth tiles can be slippery on the floor even when they work well on the walls. We help you match slip resistance to the look you want.
Good ventilation is the key in our climate. A properly sized exhaust fan that vents to the outside, run during and after each shower, pulls moisture out before it settles into grout and drywall. Sealed grout and quality waterproofing handle the rest.
Yes, and the time to plan for them is before the walls are closed. We add solid blocking inside the wall so a bench, grab bars, or a fold-down seat can be anchored securely rather than screwed into tile alone. It is a small step during framing that makes the shower safer and more comfortable for years.
Sky Pro Remodeling installs walk-in showers for homeowners across Bellevue, the Eastside, and the greater Seattle area. From mid-century houses in established neighborhoods to newer builds, we work with the space and plumbing you already have.
Do not see your neighborhood? Call (206) 825-2773 — we regularly work throughout King County.
Weighing a walk-in shower against a tub? This guide breaks down the trade-offs for resale, space, and daily use.
Design strategies that help a compact bathroom feel more open, including how a walk-in shower frees up the floor.
Current finishes, layouts, and fixtures that give Eastside bathrooms a clean, modern feel.
Send us a few details about your project and we will get back to you to set up a visit. The more you share about your current bathroom, the more useful our first conversation will be.
Let us know how we can help you!
Sky Pro Remodeling — (206) 825-2773 · Contact us
